Samsung Mono Multifunction Printer Manual De Usuario

1.4   

<Introduction>

Shows the current status and prompts during an operation. The 
message shows with specific LEDs as below. LEDs are working with 
short message on a display.

• error  LED

Blinks when the error occurs on your machine. If it blinks rapidly, the 
machine has stopped for some reason. Check the display message 
to solve the problem.

• paper LED

Blinks when the paper in the tray is empty. 

• toner LED

Blinks when the estimated cartridge life of toner is close, or 

toner cartridge is invalid.

 If it blinks rapidly, the toner cartridge is 

totally empty. Check the display message and replace the toner 
cartridge.

• paper jam LED

Lights blink when there is a paper jam in the machine. Check the 
display message to release the jammed paper.

See page 9.7 about more information on the display messages.

Copies: Increases the number of printouts. Number can be changed 
by using up/down arrows. Possible values can be added up to 99.

Reduce/Enlarge: Press this button to reduce or enlarge an image on 
the paper. You have to use up/down arrows to change the size.

Darkness: Defines the degree of darkness. Use up/down arrows to 
change the level of light/dark in the printouts.

up/down arrows: Moves to the next value when the one of copy 
buttons pressed.

Stop/Clear: Stops an operation at any time. Also, You can print a 
machine report by pressing this button for about 4 seconds.

Scan to PC: Scans an original to your computer.

Start Copy: Starts a copy job.

You can power on or off the control panel by pressing and holding this 
button for a few seconds.