Samsung Mono Laser Printer Manual De Usuario

Introduction_ 13

The color of the On-Line/Error LED and toner LED indicates the machine's 

current status.

On-Line/Error LED

The machine is warming up or ready to receive the 

data.

The machine is printing data. 

•

The machine is experiencing an error, such as 

open cover, paper empty, installer error,

 or invalid error. 

•

The machine is experiencing a service required 

error, such as LSU error, or fuser error. Contact 

your sales or service representative. 

The machine is experiencing an error such as 

jammed paper.

A toner cartridge has reached its estimated 

cartridge life. The printer stops printing. Replace 

the toner cartridge. (See "Replacing the toner 

Small amount of toner is left in the cartridge. The 

estimated cartridge life of toner is close. Prepare 

a new cartridge for replacement. You may 

temporarily increase the printing quality by 

redistributing the toner. (See "Redistributing 

A toner cartridge has almost reached its 

estimated cartridge life. Replace the toner 

cartridge. (See "Replacing the toner 

All printing errors will be appear in the

 Smart Panel 

program window.

Estimated cartridge life means the expected or estimated toner 

cartridge life, which indicates the average capacity of print-outs and is 

designed pursuant to ISO/IEC 19752. (See "Specifications" on 

page 40.) The number of pages may be affected by operating 

environment, printing interval, media type, and media size. Some 

amount of toner may remain in the cartridge even when the red LED 

turned on and the printer stops printing.
Samsung does not recommend using non-genuine Samsung toner 

cartridge such as refilled or remanufactured. Samsung cannot 

guarantee non-genuine Samsung toner cartridge's quality. Service or 

repair required as a result of using non-genuine Samsung toner 

cartridges will not be covered under the machine warranty.

In ready mode, press and hold this 
button until the On-Line/Error LED 

blinks, and release.

Press this button during printing. The 

red LED blinks while the print job is 

cleared from both the machine and 

the computer, and then the machine 

returns to ready mode. This may take 

some time depending on the size of 

the print job.

Press this button during printing. The 
On Line/Error LED blinks while the 

print job is cleared from both the 

machine and the computer, and then 

return to ready mode. This may take 

some time depending on the size of 

the print job.

In Manual Feed mode, you can’t 

cancel the print job by pressing this 

button.