Samsung External Dispenser French Door With FlexZone Drawer Guía De Instalación Rápida
06_
setting up
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE
REFRIGERATOR
REFRIGERATOR
Congratulations on your purchase of the Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
French Door Refrigerator.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator
doors to open easily.
• Allow sufficient space to the right, left, back and
top for air circulation.
• Plaease ensure that appliance can be moved freely
in the event of maintenance & service.
If the refrigerator does not have enough space, the
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra space
at the back for the water line connections.
When you install the refrigerator next to a fixed wall,
you need a minimum clearance of 3 ¾” (95mm)
between the refrigerator and wall to allow the door to
swing open.
First thing! Make sure that you can easily move your
refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways,
etc.
The following chart details the exact height and depth
of this Samsung French Door Refrigerator.
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra space
at the back for the water line connections.
When you install the refrigerator next to a fixed wall,
you need a minimum clearance of 3 ¾” (95mm)
between the refrigerator and wall to allow the door to
swing open.
First thing! Make sure that you can easily move your
refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways,
etc.
The following chart details the exact height and depth
of this Samsung French Door Refrigerator.
Model
Depth
“A”
Width “B”
Height
“c”
Overall
Height “D”
Depth “E”
RF4289HA
29½”
(749 mm)
35⅞”
(912 mm)
68⅝”
(1742
(1742
mm)
69⅝”
(1768 mm)
36¼”
(922 mm)
• Allow clearance to the
right, left, back and top
when installing.
This will help reduce power
consumption and keep
your energy bills lower.
when installing.
This will help reduce power
consumption and keep
your energy bills lower.
• Do not install the refrigerator
where the temperature will go
below 50ºF (10ºC).
below 50ºF (10ºC).
• Do not locate the refrigerator where it may become
wet.
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above
the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 9).
adjusting legs are in the up position (above
the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 9).
FLOORING
For proper installation, this refrigerator must be placed
on a leveled surface of hard material that is the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator,
or approximately 359lbs (165kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When moving
a refrigerator, you need to pull and push it straight
forwards or back. Do not wiggle it from side to side.
on a leveled surface of hard material that is the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator,
or approximately 359lbs (165kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When moving
a refrigerator, you need to pull and push it straight
forwards or back. Do not wiggle it from side to side.
3 inches
3/4
2 inches
2 inches
E
E
C
C
A
A
B
B
D
D
cAuTION
Flat-blade screw
driver(-)
control Lever
DA68-02520A(0.0)-EN.indd 6
2011.3.2 8:38:30 AM