Samsung PH49F Guía De Instalación Rápida

PM32F·PM43F·PM49F·PM55F 
PH43F·PH49F·PH55F

•  The colour and the appearance may differ depending on the product, and the specifications are subject  

to change without prior notice to improve the performance.

•  Download the user manual from the website for further details. 

http://www.samsung.com/displaysolutions

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are 
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other 
countries.

BN68-08079J-00

Contact the vendor where you purchased the product if any components are missing.

Quick Setup Guide

Warranty card (Not available in some 

locations)

Regulatory guide

MagicInfo Software DVD

+

+

-

-

Power cord

Batteries (Not available in some locations)

Remote Control

RS232C(IN) adapter

Screw (M3L8, 1 piece)

USB cover

DVI / R

GB /

MA

GICINF

O IN

HDMI2

U

SB1

RS232C

OUT

RS232C

IN

U

SB2

AUDIO

IN

HDMI1

AUDIO OUT

RJ45

DP IN

DAISY CHAIN

Connect to a USB memory device.

Connects to MDC using an RS232C adapter.

Receives sound from a source device via an audio cable.

Connects to the audio of a source device.

Connects to a source device using an HDMI cable.

DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable. 
RGB IN: Use the (dedicated) D-SUB - DVI cable (or D-SUB cable with D-SUB to DVI 
adapter) when connecting a PC. 
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box 
(sold separately).

Connects to a source device using a DP cable.

Connects to another product using a daisy chain (DP port) cable.

Connects to MDC using a LAN cable.

Issues

Solutions

The screen keeps switching 
on and off.

Check the cable connection between the product 
and PC, and ensure the connection is secure.

No Signal is displayed on the 
screen.

Check that the product is connected correctly with 
a cable.

Check that the device connected to the product is 
powered on.

Not Optimum Mode is 
displayed.

This message is displayed when a signal from the 
graphics card exceeds the product’s maximum 
resolution and frequency.

Refer to the Standard Signal Mode Table and set 
the maximum resolution and frequency according 
to the product specifications.

The images on the screen 
look distorted.

Check the cable connection to the product.

The screen is not clear.
The screen is blurry.

Adjust Coarse and Fine.

Remove any accessories (video extension cable, 
etc) and try again.

Set the resolution and frequency to the 
recommended level.

The screen appears unstable 
and shaky.

Check that the resolution and frequency of the 
PC and graphics card are set within a range 
compatible with the product. Then, change the 
screen settings if required by referring to the 
Additional Information on the product menu and 
the Standard Signal Mode Table.

There are shadows or ghost 
images left on the screen.

Issues

Solutions

The screen is too bright.
The screen is too dark.

Adjust Brightness and Contrast.

Screen color is inconsistent.

Go to Picture and adjust the Color Space settings.

White does not really look 
white.

Go to Picture and adjust the White Balance settings.

There is no sound.

Check the connection of the audio cable or adjust 
the volume.

Check the volume.

The volume is too low.

Adjust the volume.

If the volume is still low after turning it up to the 
maximum level, adjust the volume on your PC 
sound card or software program.

The remote control does not
work.

Make sure that the batteries are correctly in place 
(+/-).

Check if the batteries are flat.

Check for power failure.

Make sure that the power cord is connected.

Check for any special lighting or neon signs 
switched on in the vicinity.

[PMF_PM32~55-INDIA-QSG]BN68-08079J-00.indd   1

8/22/2016   4:22:33 PM