Samsung PH49F クイック設定ガイド
Quick Setup Guide
PM32F·PM43F·PM49F·PM55F
PH43F·PH49F·PH55F
PH43F·PH49F·PH55F
• The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
• Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
BN68-08079J-00
Checking the Components
Contact the vendor where you purchased the product if any components are missing.
Quick Setup Guide
Warranty card (Not available in some
locations)
Regulatory guide
MagicInfo Software DVD
+
+
-
-
Power cord
Batteries (Not available in some locations)
Remote Control
RS232C(IN) adapter
Screw (M3L8, 1 piece)
USB cover
Troubleshooting Guide
Reverse Side
DVI / R
GB /
MA
GICINF
O IN
HDMI2
U
SB1
RS232C
OUT
RS232C
IN
U
SB2
AUDIO
IN
HDMI1
AUDIO OUT
RJ45
DP IN
DAISY CHAIN
01
03
04
06
02
05
07
08
09
01
Connect to a USB memory device.
02
Connects to MDC using an RS232C adapter.
03
Receives sound from a source device via an audio cable.
04
Connects to the audio of a source device.
05
Connects to a source device using an HDMI cable.
06
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
RGB IN: Use the (dedicated) D-SUB - DVI cable (or D-SUB cable with D-SUB to DVI
adapter) when connecting a PC.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box
(sold separately).
RGB IN: Use the (dedicated) D-SUB - DVI cable (or D-SUB cable with D-SUB to DVI
adapter) when connecting a PC.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box
(sold separately).
07
Connects to a source device using a DP cable.
08
Connects to another product using a daisy chain (DP port) cable.
09
Connects to MDC using a LAN cable.
Issues
Solutions
The screen keeps switching
on and off.
on and off.
Check the cable connection between the product
and PC, and ensure the connection is secure.
and PC, and ensure the connection is secure.
No Signal is displayed on the
screen.
screen.
Check that the product is connected correctly with
a cable.
a cable.
Check that the device connected to the product is
powered on.
powered on.
Not Optimum Mode is
displayed.
displayed.
This message is displayed when a signal from the
graphics card exceeds the product’s maximum
resolution and frequency.
graphics card exceeds the product’s maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set
the maximum resolution and frequency according
to the product specifications.
the maximum resolution and frequency according
to the product specifications.
The images on the screen
look distorted.
look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable,
etc) and try again.
etc) and try again.
Set the resolution and frequency to the
recommended level.
recommended level.
The screen appears unstable
and shaky.
and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu and
the Standard Signal Mode Table.
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu and
the Standard Signal Mode Table.
There are shadows or ghost
images left on the screen.
images left on the screen.
Issues
Solutions
The screen is too bright.
The screen is too dark.
The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look
white.
white.
Go to Picture and adjust the White Balance settings.
There is no sound.
Check the connection of the audio cable or adjust
the volume.
the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
maximum level, adjust the volume on your PC
sound card or software program.
The remote control does not
work.
work.
Make sure that the batteries are correctly in place
(+/-).
(+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
switched on in the vicinity.
[PMF_PM32~55-INDIA-QSG]BN68-08079J-00.indd 1
8/22/2016 4:22:33 PM