Apple emac ati usb2 2005 Manuales De Servicio
eMac ATI Graphics/ USB 2.0/2005 Take Apart - 95
Memory
2.
Push the ejectors on the memory slot outward and down so they are in the open
position. Remove the memory module. Replacement Note: The memory is designed
to fit into the slot only one way. Be sure to align the notches on the module with the
small notches inside the slot.
Note: The RAM expansion modules used in the eMac (USB 2.0) computers are 184-pin
SDRAM DIMMs (dual inline memory modules) that are 2.5 V, unbuffered, 8-byte, non-
parity, and PC2700 compliant. The speed of the SDRAM devices must be rated at 167
MHz (7 ns) or faster. Refer to Kbase article 86718 for more information.
Important: The memory expansion cards (DIMMs) in the eMac (USB 2.0) computers
must use SDRAM devices as specified above. DIMMs for previous models of eMac or
DIMMs that use EDO or SGRAM devices will not work. If they are installed, the computer
will beep, and the power light will flash several times when you turn on the computer. This
indicates that the computer cannot find any useable RAM.