abit bg-72 Manual De Usuario
3-6 Chapter
3
IDE Primary Master/Slave, IDE Secondary Master/Slave
#
Click <Enter> key to enter its submenu:
IDE HDD Auto-Detection
This item allows you to detect the parameters of IDE drives by pressing <Enter> key.
The parameters will be shown on the screen automatically.
The parameters will be shown on the screen automatically.
IDE Primary/Secondary Master/Slave
When set to [Auto], the BIOS will automatically check what kind of IDE drive you
are using. If you want to define your own drive by yourself, set it to [Manual] and
make sure you fully understand the meaning of the parameters. Please refer to the
instruction manual provided by the device’s manufacturer to get the setting right.
are using. If you want to define your own drive by yourself, set it to [Manual] and
make sure you fully understand the meaning of the parameters. Please refer to the
instruction manual provided by the device’s manufacturer to get the setting right.
Access Mode
This item selects the mode to access your IDE devices. Leave this item to its default
[Auto] setting to detect the access mode of your HDD automatically.
[Auto] setting to detect the access mode of your HDD automatically.
Capacity
This item automatically displays your HDD size. Note that this size is usually slightly
greater than the size given by a disk-checking program of a formatted disk.
greater than the size given by a disk-checking program of a formatted disk.
Cylinder
This item configures the numbers of cylinders.
BG-72