abit bg-72 Manual De Usuario

This item configures the numbers of read/write heads. 

This item displays the number of cylinders at which to change the write timing. 

This item displays the number of cylinders specified as the landing zone for the 
read/write heads. 

This item configures the numbers of sectors per track. 

 

 

 

 

# 

This item sets the type of floppy drives (usually only Drive A) installed. 

This item allows you to use “3 Mode Floppy Drive” in Japanese computer system by 
selecting drive A, B, or both. Leave this item to its default [Disabled] setting if you 
are not using this Japanese standard floppy drive. 

This item defines the video mode of the system. This motherboard has a built-in VGA 
graphics system; you must leave this item at the default value. 

This item determines whether the system stops if an error is detected during system 
boot-up.