ASUS mypal a600 Manual De Usuario
Avolites Pearl 2000 Operators Manual - page
20
P2000MAN.DOC 19/10/99 17:59
•
Turn Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Start programming!!
1.8 Help and Hints
Problem : I didn’t read the manual properly and I plugged the desk in with
the wrong voltage selected. I think I’ve blown up my Power Supply. HELP!
Solution : If you can find an Electronics shop like Tandy in the UK or Radio
Shack in the US, they should be able to sell you the Power Supply called a
Baby AT for an ordinary PC. If you cannot get this, another PC power supply
may well do the job.
Although these may not actually fit inside the Pearl properly, they should
have the correct connectors fitted to run the console until you can bring
yourself to admit what you have done to Avolites and get a replacement!
the wrong voltage selected. I think I’ve blown up my Power Supply. HELP!
Solution : If you can find an Electronics shop like Tandy in the UK or Radio
Shack in the US, they should be able to sell you the Power Supply called a
Baby AT for an ordinary PC. If you cannot get this, another PC power supply
may well do the job.
Although these may not actually fit inside the Pearl properly, they should
have the correct connectors fitted to run the console until you can bring
yourself to admit what you have done to Avolites and get a replacement!
Problem : I can’t seem to get a DMX output from the Pearl.
Solution 1: Check that you have your DMX cable plugged into the correct
socket. Also check that you have not tried to patch Fixtures onto a DMX 512
output that the desk cannot drive.
Solution 2: Check that you have not reduced the number of DMX Channels
that the desk is outputting. (See section 5.21.2 Reducing the number of
DMX Channels).
Solution 1: Check that you have your DMX cable plugged into the correct
socket. Also check that you have not tried to patch Fixtures onto a DMX 512
output that the desk cannot drive.
Solution 2: Check that you have not reduced the number of DMX Channels
that the desk is outputting. (See section 5.21.2 Reducing the number of
DMX Channels).