ASUS mypal a600 Manual De Usuario
Avolites Pearl 2000 Operators Manual - page
22
P2000MAN.DOC 19/10/99 17:59
If you want to run the desk in Wide mode, repeating the above directions on
the SWOP buttons will 1 to 1 patch Channels 31 - 60 onto the top set of
Preset Faders, leaving the original 30 Channels patched on the bottom
Preset Faders. You can repeat this on each of the four Pages of Fixtures,
allowing you to patch up to 240 Dimmer Presets in this way.
the SWOP buttons will 1 to 1 patch Channels 31 - 60 onto the top set of
Preset Faders, leaving the original 30 Channels patched on the bottom
Preset Faders. You can repeat this on each of the four Pages of Fixtures,
allowing you to patch up to 240 Dimmer Presets in this way.
2.2.2 Patching individual Dimmers
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
If you have the VGA option the VGA Screen will automatically change to show which DMX
addresses are in use
addresses are in use
.
Selecting page 0 will allow you to patch Preset Faders 001 – 060.
Selecting page 1 will allow you to patch Preset Faders 101 – 160
Selecting page 2 will allow you to patch Preset Faders 201 – 260.
Selecting page 3 will allow you to patch Preset Faders 301 – 360
•
Press Softbutton A [DIMMER].
Screen asks you to enter a DMX number and
patch it to an ADD or SWOP button.
•
Using the Numeric Keypad type the number of the lowest DMX channel
you are going to use.
The Screen suggests the lowest DMX channel number
available (1), but you can type over this.
•
Press a grey Preset ADD button to patch a DMX address onto any of the
Preset Faders 1 to 30 or a blue Preset SWOP button to patch a DMX
address onto any of the Preset Faders 31 to 60
address onto any of the Preset Faders 31 to 60
.
The DMX address
automatically increments each time you patch a channel. This allows you to easily patch
sequential addresses. You can type over the incremented values if you need to.
sequential addresses. You can type over the incremented values if you need to.
⇒
You can patch any number of Dimmer DMX Channels onto any Preset
Fader.
•
Continue patching in this way until you have patched all the Dimmer
Channels that you want to patch on this Page of Fixtures.
If you are only
patching a sequential series of DMX Channels, this should simply involve pressing the
ADD or SWOP buttons of the destination Preset Faders
.
•
Select another Page of Fixtures and repeat the process if required.
You
can patch a maximum of 240 Dimmer Presets in this way.
•
Press the EXIT button or Softbutton F [QUIT THIS MENU] to leave the
patch.
Puts you in the PATCH DIMMER OR DEVICE menu.
•
Press EXIT or the PATCH button again.
Puts you back in LIVE PROGRAM
MODE menu.
⇒
Do this as soon as you have finished patching since it is easy to leave
the desk in Patch and then to inadvertently patch a Dimmer or Fixture
when meaning to recall a Preset Focus! (See Chapter Eight Preset
Focuses).
when meaning to recall a Preset Focus! (See Chapter Eight Preset
Focuses).
⇒
If you have anything more complicated to patch or you have made a
mistake, go to Chapter 5, Patching for further help.
•
Select the Page of Fixtures that you want to patch onto.