3com 9000 SX Manual De Usuario

The Switch 9000 “remembers” the last 50 commands you enter. You 
can display a list of these commands by using the following command:

history

Table 4-3 describes common commands used to manage the Switch. 
Commands specific to a particular feature are described in the other 
chapters of this guide.

Table 4-3    Common Commands 

create account [admin | user] <username> 
{<password>}

Allows you to create a user account. For more 
information on creating accounts, refer to Chapter 3.

create vlan <name>

Allows you to create a VLAN. For more information 
on VLANs, refer to Chapter 5.

config account <username> {<password>}

Allows you to configure a user account password.

config time <time>

Allows you to configure the system date and time. 
The format for <time> is:

mm/dd/yyyy hh:mm:ss 

The time uses a 24 hour clock format.

config vlan <name> ipaddress <ip_address> 
{<mask>}

Allows you to configure an IP address and subnet 
mask for a VLAN.

enable bootp vlan [<name> | all]

Allows you to enable BOOTP for one or more 
VLANs. For more information on using BOOTP, refer 
to Chapter 3.

clear session <number>

Allows you to terminate a Telnet session from the 
Switch.

disable bootp vlan [<name> | all]

Allows you to disable BOOTP for one or more VLANs.

disable port <portlist>

Allows you to disable or partition a port.

disable telnet

Allows you to disable Telnet access to the Switch.

delete account <username>

Allows you to delete a user account.

delete vlan <name>

Allows you to delete a VLAN.

logout | quit

Allows you to logout of a console or Telnet session. If 
used during a Telnet session, also closes the TCP 
Telnet session.

(continued)

SW9000.BK  Page 5  Wednesday, April 1, 1998  11:00 AM