3com 9000 SX Manual De Usuario

Table 4-18   Logging Commands 

show log config

Displays the log configuration, including the syslog 
host IP address, the priority level of messages being 
logged locally, and the priority level of messages being 
sent to the syslog host.

show log {<priority>} {<subsystem>}

Displays the current snapshot of the log. Options 
include:

■

priority — Filters the log to display message with the 
selected priority or higher (more critical). Priorities 
include critical, warning, and informational. If not 
specified, informational priority messages and 
higher are displayed.

■

subsystem — Filters the log to display messages 
associated with the selected Switch subsystem. 
Subsystems include Syst, STP Brdg, SNMP, Telnet, 
VLAN, and Port. If not specified, all subsystems are 
displayed.

clear log

Allows you to clear the log.

config log display {<priority>} 
{<subsystem>}

Allows you to configure the real-time log display. 
Options include:

■

priority — Filters the log to display message with the 
selected priority or higher (more critical). Priorities 
include critical, warning, and informational. If not 
specified, informational priority messages and 
higher are displayed.

■

subsystem — Filters the log to display messages 
associated with the selected Switch subsystem. 
Subsystems include Syst, STP Brdg, SNMP, Telnet, 
VLAN, and Port. If not specified, all subsystems are 
displayed.

(continued)

SW9000.BK  Page 21  Wednesday, April 1, 1998  11:00 AM