3com WX4400 3CRWX440095A Manual De Usuario
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
MAP Overview
203
auth-fallthru
web-auth
Uses WebAAA for users who do not
match an 802.1X or MAC
authentication rule for the SSID
requested by the user.
match an 802.1X or MAC
authentication rule for the SSID
requested by the user.
auth-psk
disable
Does not support using a preshared key
(PSK) to authenticate WPA clients.
(PSK) to authenticate WPA clients.
beacon
enable
Sends beacons to advertise the SSID
managed by the service profile.
managed by the service profile.
cac-mode
none
Does not limit the number of active
user sessions based on Call Admission
Control (CAC).
user sessions based on Call Admission
Control (CAC).
cac-session
14
If session-based CAC is enabled
(cac-mode is set to session), limits the
number of active user sessions on a
radio to 14.
(cac-mode is set to session), limits the
number of active user sessions on a
radio to 14.
cipher-ccmp
disable
Does not use Counter with Cipher
Block Chaining Message
Authentication Code Protocol (CCMP)
to encrypt traffic sent to WPA clients.
Block Chaining Message
Authentication Code Protocol (CCMP)
to encrypt traffic sent to WPA clients.
cipher-tkip
enable
When the WPA IE is enabled, uses
Temporal Key Integrity Protocol (TKIP)
to encrypt traffic sent to WPA clients.
Temporal Key Integrity Protocol (TKIP)
to encrypt traffic sent to WPA clients.
cipher-wep104
disable
Does not use Wired Equivalent Privacy
(WEP) with 104-bit keys to encrypt
traffic sent to WPA clients.
(WEP) with 104-bit keys to encrypt
traffic sent to WPA clients.
cipher-wep40
disable
Does not use WEP with 40-bit keys to
encrypt traffic sent to WPA clients.
encrypt traffic sent to WPA clients.
cos
0
If static CoS is enabled (static-cos is set
to enable), assigns CoS 0 to all data
traffic to or from clients.
to enable), assigns CoS 0 to all data
traffic to or from clients.
dhcp-restrict
disable
Does not restrict a client’s traffic to only
DHCP traffic while the client is being
authenticated and authorized.
DHCP traffic while the client is being
authenticated and authorized.
idle-client-probing
enable
Sends a keepalive packet (a null-data
frame) to each client every 10 seconds.
frame) to each client every 10 seconds.
long-retry-count
5
Sends a long unicast frame up to five
times without acknowledgment.
times without acknowledgment.
Table 10 Defaults for Service Profile Parameters (continued)
Parameter
Default Value
Radio Behavior When Parameter
Set to Default Value
Set to Default Value