3com WX4400 3CRWX440095A Manual De Usuario

C

HAPTER

 10: C

ONFIGURING

 MAP A

CCESS

 P

OINTS

Reassigns the user to a VLAN after 
roaming, instead of leaving the roamed 
user on the VLAN assigned by the 
switch where the user logged on.

Note: Enabling this option does not 
retain the user’s initial VLAN 
assignment in all cases.

Does not reduce wireless broadcast 
traffic by sending unicasts to clients for 
ARP requests and DHCP Offers and 
Acks instead of forwarding them as 
multicasts.

Does not reply on behalf of wireless 
clients to ARP requests for client IP 
addresses. Instead, the radio forwards 
the ARP Requests as wireless 
broadcasts.

No passphrase 
defined

Uses dynamically generated keys rather 
than statically configured keys to 
authenticate WPA clients.

No preshared 
key defined

Uses dynamically generated keys rather 
than statically configured keys to 
authenticate WPA clients.

disable

Does not use the RSN IE in transmitted 
frames.

disable

Does not use shared-key 
authentication.

This parameter does not enable PSK 
authentication for WPA. To enable PSK 
encryption for WPA, use the 
set radio-profile auth-psk command. 

Sends a short unicast frame up to five 
times without acknowledgment.

Sygate On Demand Agent (SODA) files 
are not downloaded to connecting 
clients.

Uses the SSID name 3Com.

Encrypts wireless traffic for the SSID.

Assigns CoS based on the QoS mode 
(wmm or svp) or based on ACLs.

Table 10   Defaults for Service Profile Parameters (continued)