3com Hub 1000 SX Manual De Usuario

The following example shows how to disable ports 3, 5, 6, and 7 and 
apply the changes. 

 ***************************************************

 **           Hub 1000 Configuration Menu         **

 ***************************************************

 [1]  Configure port settings

 [2]  Display hub status

 [3]  Update firmware image

 [4]  Change password

 [5]  Logout

 

Enter choice -> 1

Enter port number(s), from 1 to 9: 3 5-7

 ****      Port Configuration Menu     ****

 (1)  Enable port

 (2)  Disable port

 (3)  Enable Auto-Negotiation

 (4)  Disable Auto-Negotiation (Force link)

Table A-2   Port Configuration Menu  

(1) Enable port

Enable the port for linking. The factory 
default is all ports enabled.

(2) Disable port

Disable the port for linking.

(3) Enable auto-negotiation

Enable auto-negotiation. The factory 
default is auto-negotiation enabled on 
all ports.

(4) Disable auto-negotiation (force link) 

Disable auto-negotiation.

(5) Show port settings

List the current settings for all ports.

(6) Use factory default settings

Return selected ports to factory 
default settings.

(7) Save new port settings

Save the settings. Select this option if you 
want settings to persist after a hub reset.

(8) Exit without change to settings

Exit to the Hub 1000 SX Configuration 
menu without applying or saving settings.

(9) Apply changes and exit

Apply the settings and exit to the 
Hub 1000 SX Configuration menu.

If you want settings to persist after a hub 
reset, you must select option 7 before 
selecting option 9.