HP 6710b Manuales De Servicio

Remove the PC Card/audio board assembly:

Remove the Phillips PM2.5×5.0 screw (1) that secures the PC Card/audio board assembly to the

system board.

Lift the left side of the PC Card/audio board assembly (2) until it disengages from the system board.

Remove the PC Card/audio board assembly (3) by pulling it away from the system board at an

angle.

Reverse this procedure to install the PC Card/audio board assembly.

All modem module spare part kits include a modem module cable.

For use with HP Compaq 6715 computer models and with HP Compaq 6710 computer models in all

countries and regions except Japan and Asia/Pacific

441074-001

For use with HP Compaq 6710 computer models in Japan and Asia/Pacific countries and regions

449139-001

Before removing the modem module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the following components:

. Hard drive (see 

. Memory/WLAN module compartment cover (see 

)

92 Chapter 4   Removal and replacement procedures

ENWW