HP 6710b Manuales De Servicio

Remove the memory module (2) by pulling the module away from the slot at an angle.

Memory modules are designed with a notch (3) to prevent incorrect installation into the

memory module slot.

Reverse this procedure to install the internal memory module.

Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords

and CMOS settings to be cleared.

RTC battery

449137-001

Before removing the RTC battery, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory/WLAN module compartment cover (see 

Release the keyboard (see 

).

Remove the RTC battery:

ENWW

Component replacement procedures 67