HP consumer dv7-6b56nr notebook a1t84uar#aba Manual De Usuario
4–12
Maintenance and Service Guide
Removal and replacement procedures
Hard drive
✎
The hard drive spare part kit (spare part number 517639-001) includes left and right bracket rails, a connector
cable, Mylar cover with tab, and 4 rubber isolators.
cable, Mylar cover with tab, and 4 rubber isolators.
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
).
5. Remove the primary hard drive cover (see
). If you are removing the
secondary hard drive, remove the secondary hard drive cover also (see
✎
In order to remove the secondary hard drive cover, the primary hard drive cover must be removed first.
✎
This computer has two hard drives in two separate hard drive bays. The following procedure can be used to
remove a hard drive from either hard drive bay.
remove a hard drive from either hard drive bay.
Remove the hard drive:
1. Position the computer upside down with the front toward you.
Description
Spare part number
500-GB, 7200-rpm (select models only)
574640-001
500-GB, 5400-rpm
509417-001
320-GB, 7200-rpm
509413-001
320-GB, 5400-rpm
509415-001
250-GB, 7200-rpm
509412-001
250-GB, 5400-rpm
509414-001