Manualsbrain.com
  1. Manuales
  2. Marcas
  3. HP
  4. dl385
  5. Manual De Usuario

HP dl385 Manual De Usuario

Descargar
Página de 112
 
Operations 21 
Operations 
Power up the server 
To power up the server, press the Power On/Standby button. 
 
Power down the server 
  
 
WARNING:
  To reduce the risk of personal injury, electric shock, or damage to the equipment, 
remove the power cord to remove power from the server. The front panel Power On/Standby 
button does not completely shut off system power. Portions of the power supply and some 
internal circuitry remain active until AC power is removed. 
  
  
 
IMPORTANT:
  If installing a hot-plug device, it is not necessary to power down the server. 
  
1. 
Back up the server data. 
2. 
Shut down the operating system as directed by the operating system documentation. 
  
 
NOTE:
  If the operating system automatically places the server in Standby mode, omit the next 
step. 
  
3. 
Press the Power On/Standby button to place the server in Standby mode. When the server activates 
Standby power mode, the system power LED changes to amber. 
  
 
IMPORTANT:
  Pressing the UID button illuminates the blue UID LEDs on the front and rear 
panels. In a rack environment, this feature facilitates locating a server when moving between 
the front and rear of the rack. 
  
4. 
Disconnect the power cords. 
The system is now without power. 
 
Extend the server from the rack 
1. 
Pull down the quick release levers on each side of the server. 
2. 
Extend the server until the server rail-release latches engage. 
  
 
WARNING:
  To reduce the risk of personal injury or equipment damage, be sure that the rack 
is adequately stabilized before extending a component from the rack.