HP proliant ml370 Manual De Usuario

Removal and replacement procedures  47 

Remove the FBDIMM. 

 

To replace the component, reverse the removal procedure. 

 

Processor 

  CAUTION:  To prevent possible server malfunction, do not mix processors of different speeds or cache 

sizes. Refer to the label on the processor heatsink for a description of the processor. 

  CAUTION:  Be sure that you have the current version of the system ROM. Failure to flash the ROM with the 

correct version before installing or replacing the processor causes system failure. For the most current version 
of the ROM, go to the HP website (

). 

  CAUTION:  To avoid damage to the system board: 

•

  Do not touch the socket contacts. 

•

  Always install the processor socket cover after removing the processor from the socket. 

•

  Do not tilt or slide the processor when lowering the processor into the socket. 

  CAUTION:  To avoid damage to the processor: 

•

  Handle the processor only by the edges.  

•

  Do not touch the bottom of the processor, especially the contact area. 

  IMPORTANT:  Processor socket 1 must always be populated. If processor socket 1 is empty, the server 

does not power up. 

To remove the component: 

Power down the server (on page 

Do one of the following: 

•

Unlock and remove the bezel ("

•

Extend the server from the rack (on page 

Remove the access panel ("

Remove the processor air baffle ("

" on page 

). 

Open the heatsink retaining latches.