HP proliant ml370 Manual De Usuario
Removal and replacement procedures 59
5.
Remove the battery pack.
To replace the component, reverse the removal procedure.
System board
IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number
through RBSU.
To remove the component:
1.
Power down the server (on page
2.
Do one of the following:
•
Unlock and remove the bezel ("
•
Extend the server from the rack (on page
3.
Remove the access panel ("
4.
Remove all expansion boards ("
" on page
5.
Remove the processor air baffle ("
" on page
6.
Remove the center wall ("
" on page
7.
Remove the memory board ("
8.
Remove the PPM ("
9.
Disconnect all cables attached to the system board.
10.
Remove the heatsink (on page