HP proliant bl e-class Manual De Usuario

This section provides information on solutions to problems that may occur during the 
configuration and operation of a Proliant BL e-Class C-GbE Interconnect Switch. The 
following table lists steps you should take before calling your service representative. 

Following are four tables with basic troubleshooting information: 

• 

• 

• 

• 

• 
• 
• 
• 
• 

Setting Up and Accessing—Table I-1 contains general troubleshooting information 
about setting up and accessing the interconnect switch. Topics covered include LEDs, 
cables, failure of the interconnect switch to get IP settings, failure to connect to the 
interconnect switch remotely, and what to do if you forget your administrator user name 
and password. 

Configuring—Table I-2 contains general troubleshooting information about configuring 
the interconnect switch. Topics covered include configuring VLANs and XConnect ports. 

Using the TFTP Server—Table I-3 contains general troubleshooting information about 
using a TFTP server to backup interconnect switch configuration or to configure multiple 
interconnect switches. 

Upgrading Firmware using the Serial Port—Table I-4 contains general 
troubleshooting information about upgrading system firmware using the serial 
console port. 

For additional troubleshooting information, refer to 

Appendix D, Spanning Tree Protocol 

Appendix F, Upgrading Firmware by Means of the Serial Port 

Appendix G, Port Trunking and Load Balancing in Blade Switches 

Appendix H, XML Configuration 

The following website: 

www.compaq.com/support/