HP proliant bl e-class Manual De Usuario
J
RJ-45 Pin Specification
When connecting the HP ProLiant BL e-class C-GbE Interconnect Switch to a switch, bridge,
or hub, a Category 5 Ethernet cable is necessary. Review these products for matching cable
pin assignments.
or hub, a Category 5 Ethernet cable is necessary. Review these products for matching cable
pin assignments.
Figure J-1 displays the standard RJ-45 receptacle/connector. Table J-1 provides the pin
assignments for the switch-to-network adapter card connection, and for the Category 5
Ethernet cable for a switch-to-switch, –hub, or –bridge connection.
assignments for the switch-to-network adapter card connection, and for the Category 5
Ethernet cable for a switch-to-switch, –hub, or –bridge connection.
Figure J-1: Standard RJ-45 receptacle/connector
Table J-1: RJ-45 Connector Pin Assignments
Contact
Media Direct Interface
Signal for 10/100
Signal for 10/100
Media Direct Interface
Signal for 1000T
Signal for 1000T
1
Tx + (transmit)
BI_DA+
2
Tx – (transmit)
BI_DA-
3
Rx + (receive)
BI_DB+
4 Not
used
BI_DC+
5 Not
used
BI_DC-
6
Rx – (receive)
BI_DB-
7 Not
used
BI_DD+
8 Not
used
BI_DD-
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
J-1
HP CONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:55 AM