HP procurve 2500 Manual De Usuario

    240

■

If dynamic trunks are configured and the switch is rebooted, the switch may crash 

with a message similar to:

->Software exception at rstp_dyn_reconfit.c:243 in -- 'Lpmgr'

■

The "show config" CLI command may cause the switch to crash with a message 

similar to:

->Software exception "xlate.c:1358 in 'mSess1'

■

When hot-swapping transceivers multiple times, the switch may crash with a 

message similar to:

 -> Software exception at port_sm.c:378 in -- 'mPmSlvCtrl'

■

The switch may crash with a message similar to:

-> Software exception at alloc_free.c:545 -- in 'eDrvPoll'

■

The switch may crash with a message similar to:

->Asserts in rv.cc line 632 

■

When adding ports to a manual LACP trunk configuration, the switch may crash 

with a message similar to:

-> Assert line 10070 cli_config_action.c

■

The switch may crash with a message similar to:

-> Bus Error: HW Addr=0x0000000 IP=0x002fe640 Task='eTelnetd'

This crash has been associated with security/vulnerability test applications such as Nessus.

■

Log messages for trunks and trunk members enhanced to be easier to read.

■

Upstream GVRP neighbor does not pass VLAN information to downstream 

neighbor after a topology change. 

■

Interoperability issues with some Cisco devices (such as some Cisco Catalyst 5000 

& 6000 series switches) cause IGMP groups to be aged out of the switch's IGMP tables 
prematurely.

■

 802.1X and LACP trunks can co-exist on the same port. (Fix is to make 

these trunks mutually exclusive.)

■

LACP maintains a dynamic trunk with only 1 port configured for the trunk group.