HP proliant dl580 Manual De Usuario

Server component identification 78 

When the boot device selector switch is set to FLP TOP, the optical drive in the bottom bay is designated 
as the primary optical drive. The diskette drive in the top bay is bootable. The server cannot boot from a 
diskette drive in the bottom bay when the boot device selector switch is set to FLP TOP. 

When the boot device selector switch is set to FLP BOT, the optical drive in the top bay is designated as 
the primary optical drive. The diskette drive in the bottom bay is bootable. The server cannot boot from a 
diskette drive in the top bay when the boot device selector switch is set to FLP BOT. 

  NOTE:  If two optical drives are installed in the server, the server will first attempt to boot from the primary 

). The boot device selector switch setting determines 

which drive is the primary optical drive. 

    

FLP TOP (default)  Diskette drive in top bay is bootable  

Primary optical drive in bottom bay is bootable 

FLP BOT 

Primary optical drive in top bay is bootable 

Diskette drive in bottom bay is bootable 

 

 

QuickFind diagnostic display LEDs 

The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM might 
report server status differently than the health LEDs because the software tracks more system attributes. 

The amber QuickFind diagnostic display LEDs are located on the media board. In normal operations, all 
of the LEDs are off unless one of the components fails.