HP proliant dl580 Manual De Usuario
Server component identification 80
LED Description
OVER TEMP
The internal temperature has exceeded operating levels.
NO BOOT
A "no boot" condition was detected.
P84
Switch set to display port 84 codes.
P85
Switch set to display port 85 codes ("
on page
Setting the switch to view port 85 codes
To change the display on the QuickFind diagnostic panel to view port 84 and 85 codes
("
("
1.
Extend the server from the rack ("
2.
Remove the access panel ("
3.
4.
Set the switch to the P85 position to view port 85 codes.
DIMM slot locations
Item Description
Bank
1
DIMM slot 1
A
2
DIMM slot 2
A
3
DIMM slot 3
B
4
DIMM slot 4
B
SCSI IDs
The server supports single- or dual-channel hard drive configurations. The single-channel configuration
(simplex mode) supports up to four hard drives on one channel. The dual-channel configuration (duplex
mode) supports two hard drives on each channel (SCSI IDs 0 and 1).
(simplex mode) supports up to four hard drives on one channel. The dual-channel configuration (duplex
mode) supports two hard drives on each channel (SCSI IDs 0 and 1).