HP proliant dl580 Manual De Usuario
Removal and replacement procedures 46
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
The installation is complete.
Removing the SAS-SATA backplane
1.
Power down the server (on page
2.
Remove the access panel ("
3.
4.
Remove the screws securing the SAS hard drive cage.
5.
Slowly pull the SAS hard drive cage out of the server until there is enough room to reach behind the
SAS hard drive cage.
SAS hard drive cage.
6.
Disconnect all cables from the back of the SAS hard drive cage.