HP ProLiant ML330 G6 Manual De Usuario
Hardware options installation 60
7.
Install the tape drive.
8.
Connect the power cable to the rear of the drive.
9.
Connect the USB tape drive cable to the rear of the drive and to the USB tape drive connector on the
system board.
system board.
10.
Remove the applicable bezel blank from the bezel ("
11.
12.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
13.
Power up the server (on page
Full-height tape drive option
For clarity, the following illustrations include option cabling only.