HP qms 1660e Manual De Usuario
Intellifont SIMM
6-31
Printer Options
4
Insert the SIMM into the SIMM connector.
Hold the SIMM at a 45° angle to the controller board, with the
notch in the bottom left corner. Then push gently in on it to seat it
securely in the connector.
notch in the bottom left corner. Then push gently in on it to seat it
securely in the connector.
6
Replace the printer and controller board covers.
Use the instructions in the “Replacing the Printer and Controller
Board Covers” section of this chapter.
Board Covers” section of this chapter.
5
Snap the SIMM into
place.
place.
With a thumb on each
top corner, gently press
down on the SIMM to
snap it into place (at
approximately a 30°
angle to the controller
board).
top corner, gently press
down on the SIMM to
snap it into place (at
approximately a 30°
angle to the controller
board).
Notch