Samsung CLP-600 Manual De Usuario

Setting Up Your Printer

2.7

Connect the other end of the cable to the USB port on your 

computer. 

:

 To print using the USB interface, you must run 

Windows 98SE/Me/2000/2003/XP or Macintosh with OS 10.3 
~ 10.4.

You can attach your printer to a network using an Ethernet 
cable (UTP cable with RJ.45 connector). The CLP-600N has a 
built-in network interface card.

If you want to use the printer in both wired and wireless 
network environments, you need to install an optional wired/
wireless network interface card. Contact your Samsung dealer 

or the retailer where you bought the printer. We strongly 
recommend that the card be installed by a trained service 
professional.

Make sure that both the printer and the computer are 
turned off.

Plug one end of the Ethernet cable into the Ethernet 
network port on the left rear of the printer.

Plug the other end of the cable into a network LAN 

connection.

: After connecting the printer, you need to configure the 

network parameters on the control panel. See page 8.1. You 
can use the software supplied with the card. Refer to the 

Network Printer User’s Guide. 

To the network

LAN connection

Plug the power cord into the power receptacle on the left 
rear of the printer. 

Plug the other end into a properly grounded AC outlet and 
turn on the power. 

:

• Some parts inside of the printer may be hot when power is 

on, or after printing. Be careful not to burn yourself when 
working inside the printer.

• Do not disassemble the printer when it is turned on or 

plugged in. Doing so may give you an electric shock.

Print a demo page to make sure that the printer is operating 
correctly.

To print a demo page:

In ready mode, press and hold the On Line/Continue button 
(

) on the control panel for 2 seconds to print a demo page.

A demo page showing the printer’s features and capabilities is 

printed.