Samsung CLP-600 Manual De Usuario

Using Your Printer on a Network (CLP-600N only)

8.1

If you work in a networked environment, the printer can be 
shared by other users on the network.

This chapter includes:
• About Sharing the Printer on a Network
• Setting Up a Network-Connected Printer

: If you are a CLP-600 user, you can only connect your 

printer to a network locally, for use via a single computer.

If you work in a networked environment, you can connect your 
printer to the network.

You can connect the printer directly to a selected computer, 
which is called the “host computer” on the network. The printer 

can then be shared by other users on the network through a 
Windows 98SE/Me/XP/NT 4.0/2000/2003 network printer 
connection.

For details about sharing the printer locally, see the Software 
section.

The CLP-600N printer has a built-in network interface. For more 
information about connecting your printer to a network, see 
2.7.

To use a CLP-600N printer in a wireless network environment, 
you need to install an optional wired/wireless network interface 

card in your printer.

Contact your Samsung dealer or the retailer where you bought 
your printer. We strongly recommend that the card be installed 

by a trained service professional.

Whether the printer is locally connected or network-connected, 

you need to install the CLP-600 series printer software on each 
computer that prints documents using the printer.

You have to set up the network protocols on the printer to use 

it as your network printer. Setting protocols can be 
accomplished by using the supplied network program. Please 
refer to the Network Printer User’s Guide. 

You can configure the basic network parameters through the 
printer’s control panel. Use the printer control panel to do the 
following:

• Enable or disable network protocols (IPX/SPX)

• Configure TCP/IP

• Configure IPX frame types 

: The operating systems supported by the network card 

may be different than the operating systems supported by the 
printer. The following table shows the network environments 
supported by the printer. 

• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol

Network Interface

10/100 Base-TX (standard) or 
802.11a/b/g Wireless LAN

Network Operating 

System

• Novell NetWare 4.x, 5.x, 6.x

• Windows 98SE/Me/NT 4.0/2000/

2003/XP

• Various  Linux  OS

• Macintosh OS 10.3 ~ 10.4

Network Protocols

• Netware IPX/SPX
• TCP/IP, DLC/LLC on Windows 

Dynamic Addressing 
Server

DHCP, BOOTP