Samsung CLP-600 Manual De Usuario

Solving Problems

7.7

After removing the jammed paper, check for paper which 

may be jammed in other parts of the printer.

After making sure that the access door is open, close the 
top cover. Make sure that it is securely latched.

Close the access door firmly. The printer will resume 

printing.

:

 If the top cover and access door are not completely 

closed, the printer will not operate.

If paper is jammed in the paper exit area, a lamp turns on at 
the corresponding location on the Status map. If you use the 

CLP-600N, “Jam In Exit Area” also appears on the display.

If a long portion of the paper is visible, pull it straight out. 
Open and close the access door firmly. The printer will 

resume printing.

If you cannot find the jammed paper, or if there is any 
resistance removing the paper, stop pulling and go to step 
2.

Using the handle, completely open the access door.

:

• Do not touch the green surface, the OPC drum, on the front 

of each toner cartridge with your hands or any other 
material. Use the handle on each cartridge in order to avoid 

touching this area.

• Be careful not to scratch the surface of the paper transfer 

belt.

• If you leave the access door open for more than a few 

minutes, the OPC drum can be exposed to light. This will 
cause damage to the OPC drum. Close the access door 

should the installation need to be halted for any reason.

Open the top cover.