Samsung dvd-v440 Manual De Usuario
ENG-23
Using the Tape Counter
Index Skip Search
This feature will enable you to fast forward/rewind to a
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
1
After pressing the SEARCH, press the
corresponding
corresponding
,
❷
buttons, until the Intro Scan
option is selected.
2
Press the OK or
❿
.
3
Press the
➛➛
or
❿❿
buttons twice more.
This will take you directly to the start of the desired
programme is located.
programme is located.
4
These Index searches can be made forwards:
(press
(press
❿❿
) or backwards: (press
➛➛
).
(
➛➛
-20
●
●
0
●
●
+20
❿❿✌
5
To cancel an Index search simply press the
❿
II or
■
button.
Searching for a Specific
Sequence
Sequence
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
After pressing the SEARCH, press the
corresponding
corresponding
,
❷
buttons, until the Go To
[0:00:00] option is selected.
2
Press the OK or
❿
.
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.If
the VCR reaches the end of the tape during end
search, the tape will be ejected.
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.If
the VCR reaches the end of the tape during end
search, the tape will be ejected.
Intro Scan
1
After pressing the SEARCH, press the
corresponding
corresponding
,
❷
buttons, until the Intro Scan
option is selected.
2
Press the OK or
❿
.
3
Press the
➛➛
or
❿❿
buttons depending on the
direction where your desired programme is located.
4
When an Index mark is found the DVD-VCR will
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
5
If you want to watch the tape from a particular
Index, simply press
Index, simply press
❿
II twice.
The tape counter:
◆
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆
Is reset when a cassette is inserted in the DVD-VCR
◆
Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a
sequence:
sequence:
◆
Press INFO. twice to display the counter
◆
Press CLEAR when you want to set the tape
counter to zero.
INTRO SCAN :
INDEX SEARCH : - 6
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 23