Samsung dvd-v440 Manual De Usuario
ENG-24
3
When you are ready,
◆
Start playback or Recording.
◆
Press the
■
button.
◆
To fast-froward or rewind to the sequence at
which the counter was set to zero, press
➛➛
or
❿❿
.
➢
Some DVD-VCR information, such as the counter,
can be displayed on the television screen (unless
you have deactivated the Screen messages mode;
refer to page 17).
can be displayed on the television screen (unless
you have deactivated the Screen messages mode;
refer to page 17).
Press INFO.:
◆
Once to display the current function,
programme number, recording speed, date,
time and counter
time and counter
◆
Twice to display the counter only
◆
Three times to display the time remaining on
the cassette
◆
Four times to clear the display
0:00:00
Connecting an RCA
Audio/Video Input Cable
Audio/Video Input Cable
1
3
3
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples:
◆
You wish to copy a video cassette with
the help of a second VCR.
◆
You wish to play back and/or copy
pictures taken with a camcorder .
☛
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into
the VIDEO INPUT socket on the front of the DVD-VCR.
the VIDEO INPUT socket on the front of the DVD-VCR.
2
Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
appropriate output connector on the other system
(VCR or camcorder).
3
Connect one end of the RCA audio cable supplied
into the AUDIO INPUT sockets on the front of the
DVD-VCR.
into the AUDIO INPUT sockets on the front of the
DVD-VCR.
➢
Take care to respect the colour coding of the
left and right channels.
4
Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
Using the Assemble Edit
Function
Function
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
specific position on the cassette while maintaining a
very smooth scene change.
1
Insert the cassette to be edited in your DVD-VCR.
2
Press the
❿
ll
button to start playback.
3
When you reach the position from which you wish
to start the new recording, press the
to start the new recording, press the
❿
ll
button.
4
Press the F.ADV/STEP button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
necessary to advance frame by frame, until the
exact recording position is located.
5
While the DVD-VCR is in still mode, hold the REC
button (
button (
●
) down for a while to activate the
Assemble Edit function.
6
Select the source from which you wish to record by
pressing:
pressing:
◆
The PROG buttons for television channels
◆
The INPUT SEL. button for the LINE input
sources
7
Press the
❿
ll
button to start recording.
8
When you have finished recording, press
■
.
(DVD-V540/DVD-V440)
(DVD-V340)
3
1
Using the Tape Counter
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 24