Samsung SCX-4100 Manual De Usuario

Descargar
Página de 167
T
ROUBLESHOOTING
8.8
Clearing LCD Error Messages
Messages appears on the display to indicate the control panel to 
indicate the machine’s status or errors. Refer to the following 
table to understand the message’s meaning and correct the 
problem, if necessary. Messages and their meanings are listed 
in alphabetical order. 
Display
Meaning
Suggested solutions
Door Open
The front or rear cover is not 
securely latched.
Close the cover until it locks 
into place.
[JAM 1] or
[No Cartridge]
The toner cartrige is not 
installed.
Install the toner cartridge. See 
page 1.6
Low Heat Error
There is a problem in the 
fuser unit.
Unplug the power cord and 
plug it back in. If the problem 
persists, please call for 
service.
Open Heat Error
[Over Heat]
[LSU Error]
A problem has occurred in 
the LSU (Laser Scanning 
Unit).
Unplug the power cord and 
plug it back in. If the problem 
persists, please call for 
service.
No Paper
[Add Paper]
The paper tray has run out 
of paper.
Load paper in the paper tray. 
Paper Jam 0
Open/Close Door
Paper has jammed in the 
feeding area of the paper 
tray.
Clear the jam. See page 8.2.
Paper Jam 1
Open/Close Door
• Paper has jammed in the 
fuser area.
• A paper jam has occurred 
in the manual feeder or 
the machine detects non-
feeding from the manual 
feeder.
• Clear the jam. See page 8.5.
• Clear the jam. See page 8.6
Paper Jam 2
Check Inside
Paper has jammed in the 
paper exit area.
Clear the jam. See page 8.3.