Sony 4-168-043-14(1) Manual De Usuario

 

 

 

 

 

 

 

You can set the FM station receiving mode and 
name the preset stations.

x FM MODE

• STEREO

This receiver will decode the signal as stereo 
signal when the radio station is broadcast in 
stereo.

• MONO

This receiver will decode the signal as mono 
signal regardless of the broadcast signal.

x NAME IN 

Lets you set the name of preset stations. For 
details, see “Naming preset stations” (page 
41).

You can make settings for the audio to suit 
your preference.

x A/V SYNC

Lets you delay the output of audio to minimize 
the time gap between audio output and visual 
display.
• SYNC ON (Delay time: 60 ms)

The audio output is delayed so that the time 
gap between the audio output and visual 
display is minimized.

• SYNC OFF (Delay time: 0 ms)

The audio output is not delayed.

• This parameter is useful when you use a large LCD 

or plasma monitor or a projector.

• This parameter is valid only when you use a sound 

field selected with the 2CH or A.F.D. buttons.

• This function does not work in the following cases:
– signals with a sampling frequency of more than 

 

48 kHz is input.

– the multi channel Linear PCM signals are received 

via an HDMI IN jack.

– Analog Direct function is selected (page 42).

x DUAL

Lets you select the language you want to listen 
to during digital broadcast. This feature only 
functions for Dolby Digital sources.
• MAIN/SUB

Sound of the main language will be output 
through the front left speaker and sound of 
the sub language will be output through the 
front right speaker simultaneously.

• MAIN

Sound of the main language will be output.

• SUB

Sound of the sub language will be output.

x DEC. PRIO

Lets you specify the input mode for the digital 
signal input to the DIGITAL IN jacks or 
HDMI IN jacks.
• DEC. AUTO

Automatically switches the input mode 
between DTS, Dolby Digital, or PCM.

• DEC.  PCM

 

When signals from the DIGITAL IN jack are 
selected, PCM signals are given priority (to 
prevent interruption when playback starts). 
However, when other signals are input, there 
may be no sound, depending on the format. 
In this case, set this item to “DEC. AUTO”. 
When signals from the HDMI IN jack are 
selected, only PCM signals are output from 
the connected player. When signals in any 
other format are received, set this item to 
“DEC. AUTO”.

• Even when “DEC. PRIO” is set to “DEC. 

PCM”, the sound may be interrupted at the very 
beginning of the first track depending on the CD 
being played back.

• When playback DTS CD, set “DEC. PRIO” to 

“DEC. AUTO”.

x A. ASSIGN

Lets you assign the digital audio input to other 
input source. For details, see “Enjoying the 
sound from other inputs” (page 53).