Sony HT-SF1300 Manual De Usuario
25
GB
Getting Star
ted
Press AMP MENU, then press
AUTO CAL.
AUTO CAL.
You can also select “A.CAL YES” in the
A. CAL menu.
The following appears on the display.
A.CAL [5]
The following appears on the display.
A.CAL [5]
t A.CAL [4] t A.CAL [3] t
A.CAL [2]
t A.CAL [1]
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
Note
You cannot measure the speaker height of the
surround speakers. Set this value using “SUR POS.”
parameters in the SYSTEM menu (page 35).
surround speakers. Set this value using “SUR POS.”
parameters in the SYSTEM menu (page 35).
Tip
When Auto Calibration starts:
– Stand some distance from the speakers and the
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
To cancel Auto Calibration
The Auto Calibration function will be
canceled when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote or INPUT
canceled when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote or INPUT
SELECTOR on the receiver.
– Change the volume level.
– Press AUTO CAL again.
– Press AUTO CAL again.
1
Confirm the measurement
result.
result.
When the measurement ends, a beep
sounds and the measurement result
appears on the display.
sounds and the measurement result
appears on the display.
Performing Auto Calibration
Measurement for
Display
Speaker existance
TONE
Speaker gain, distance,
frequency response
frequency response
T.S.P.
Subwoofer gain and distance
WOOFER
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
VIDEO1
VIDEO2
BD
DVD
2CH
A.F.D.
RETURN/EXIT
TV CH
TV CH
MOVIE
MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
SAT
TV
SA-CD/CD TUNER
?/1
-
O
5
>10
MEMORY
MENU/HOME
TOOLS/
OPTIONS
OPTIONS
TV ?/1
AV ?/1
AUTO CAL
Input
buttons
buttons
?/1
switch
switch
MASTER
VOL +/–
VOL +/–
MUTING
AMP MENU
Confirming/saving the
measurement results
measurement results
Measurement
result
result
Display
Explanation
When the
measurement
process
completes
properly
measurement
process
completes
properly
SAVE
Proceed to step
2.
2.
When the
measurement
process fails
measurement
process fails
ERROR
XXXX
XXXX
continued