Sony mpk-dvf2 Manual De Usuario
10
-US
Preparing
3
Attaching the camcorder to the marine pack
The cords are placed in the plug holders of the marine pack at the factory. Pull the
plugs out of the holders when in use.
plugs out of the holders when in use.
(1) For DCR-TRV7 only, connect the monitor plug to AUDIO VIDEO jack.
(2) Connect the remote plug to LANC control (2) jack, and the microphone
(2) Connect the remote plug to LANC control (2) jack, and the microphone
plug to MIC jack (plug in power) (1).
(3) Attach the camcorder.
Insert the camera mounting shoe until it clicks.
(4) For DCR-TRV8/TRV9/TRV10/TRV890/TRV900, connect the monitor cord to the
jack of camera mounting shoe B.
(5) Attach the front shell to the rear shell. Hold the both shells firmly and fasten 3
buckles securely.
Take care not to pinch the remote, microphone, and monitor cords. If this
happens water may leak in.
Take care not to pinch the remote, microphone, and monitor cords. If this
happens water may leak in.
(6) Attach the grip.
Note
To prevent the cords from twisting or slacking,
make sure that these plugs are inserted as the
correct direction as the illusration.
To prevent the cords from twisting or slacking,
make sure that these plugs are inserted as the
correct direction as the illusration.