Sony SLV-SE810B Manual De Usuario

20

Tuning your TV to the VCR

Set the TV to the video channel and press CHAINE +/– on the VCR.  If the 
TV screen changes to a different programme each time you press 
CHAINE +/–, the TV tuning is correct. 

If the screen does not appear clearly in step 6 above, go to step 7 to finish this 
procedure once.  Then start again from step 2.  After pressing REGL 
CANAL in step 2, press CHAINE +/– while the RF channel is displayed, so 
that another RF channel appears.  Then tune the TV to the new RF channel 
so that a clear picture appears.

Press CHAINE +/– (repeatedly) to select the appropriate TV system 
for your area.

Select “L” for the L TV system (SECAM), or “G” for the B/G TV 
system (PAL).

Tune the TV to the same channel 
shown in the VCR display window so 
that the picture on the right appears 
clearly on the TV screen.

Refer to your TV manual for TV 
tuning instructions.

If you select the wrong TV system in 
step 5, the picture on the right may 
not appear.  Select the appropriate TV system and tune the TV 
again.

If the picture does not appear clearly, see “To obtain a clear picture 
from the VCR” below. 

Press REGL CANAL.

You have now tuned your TV to the VCR.  Whenever you want to 
play a tape, set the TV to the video channel.

CHAINE

MAGNETOSCOPE SONY

REGLAGE

AUTO

REGL CANAL