Nokia 5140 Manuales De Servicio
![Nokia](https://files.manualsbrain.com/attachments/dce7461e47de2eca5f7d09be31ff1fc55db75997/common/fit/150/50/3540f9922a492527aa17737eb6cc8428f11e9c5169db0829a90bcdf9088f/brand_logo.jpeg)
Nokia Customer Care
Company confidential
NPL-4/5
Issue 1 05/04
Copyright © 2004 Nokia Corporation. All rights reserved.
Page 5
Service Software
Overview
The following steps will be required to use service software with NPL-4/5.
• Install Phoenix Service Software.
• Install data package for NPL-4/5 for your region.
• FPS-8 flash update.
• JBV-1 docking station SW update.
• Install data package for NPL-4/5 for your region.
• FPS-8 flash update.
• JBV-1 docking station SW update.
Phoenix
Phoenix is the new generation service software for reprogramming, testing and tuning
the phone. It has been designed to meet the challenges in servicing modern cellular
phone technology.
the phone. It has been designed to meet the challenges in servicing modern cellular
phone technology.
The Phoenix program has been built using component architecture. This means that the
actual program is small and most of the program’s functionality is divided into dynami-
cally loaded modules (DLLs).
actual program is small and most of the program’s functionality is divided into dynami-
cally loaded modules (DLLs).
Supported operating systems
Windows 2000 and XP.
Hardware requirements for using Phoenix
Minimum:
Processor 300 MHz, RAM memory 64 MB, disk space 100 MB.
Processor 300 MHz, RAM memory 64 MB, disk space 100 MB.
Recommended for Windows 2000:
Processor 700 MHz, RAM memory 256 MB, disk space 150 MB.
Processor 700 MHz, RAM memory 256 MB, disk space 150 MB.
Introduction
This section briefly describes how to install the Phoenix software and includes some
basic information on how to use the program. For more detailed information, please refer
to Phoenix
basic information on how to use the program. For more detailed information, please refer
to Phoenix
Help files. Each feature in Phoenix has its own Help function, which can be
activated while running the program.
Press the F1 key or the feature’s Help button to activate a Help file.
Installing Phoenix
Phoenix Service Software
A13 2004.08.5.42 or later required.
It is recommended to uninstall the previous NPL-4/5 Phoenix package before installing
the new one. Do it as follows:
the new one. Do it as follows:
•
Download the latest Phoenix release. Please contact your regional After Market Ser-
vices point for information on where to download the latest release.
vices point for information on where to download the latest release.