Nokia 5140 Manuales De Servicio
NPL-4/5
Company confidential
Nokia Customer Care
Page 6
Copyright © 2004 Nokia Corporation. All rights reserved.
Issue 1 05/04
Download and read the release notes which have useful information on the software
version you are using.
version you are using.
•
Download the latest data packages for the products you will be using.
•
Before you start installing the program, check that the dongle is attached to the
parallel port. Contact your supervisor in order to obtain a suitable dongle.
Administrator rights are required in order to be able to install Phoenix.
parallel port. Contact your supervisor in order to obtain a suitable dongle.
Administrator rights are required in order to be able to install Phoenix.
• Install Phoenix by executing the Phoenix installation package and follow the
instructions on the screen.
Initially, the setup files are extracted into the file system.
Initially, the setup files are extracted into the file system.
Note: If the setup files are already extracted (left in the file system from previous
installation) the “Overwrite Protection” dialog appears. Always click
installation) the “Overwrite Protection” dialog appears. Always click
“Yes to All” to
overwrite the existing setup files.
The installation checks that the latest supported dongle driver version is installed.
The dongle driver is installed if there is no previous installation of the dongle driver or if
the installed dongle driver is older than the latest supported version.
The dongle driver is installed if there is no previous installation of the dongle driver or if
the installed dongle driver is older than the latest supported version.
Note: If the dongle driver is installed during installation, you need to reboot your PC and
restart the installation after reboot.
restart the installation after reboot.
Program files are stored under C:\Program Files\Nokia\Phoenix (default).
If at any point during installation you get this message, Dongle is not found and installa-
tion can´t continue.
tion can´t continue.
Possible reasons may be defective or too old PKD-1Dongle (five digit serial number Don-
gle when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or
power to it is not supplied by external charger.
gle when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or
power to it is not supplied by external charger.
Check the COM /parallel ports used first! After correcting the problem Installation can be
restarted.
restarted.
Uninstalling Phoenix
If you need to remove Phoenix Service Software from your computer: