Panasonic KX-TG6072 Manual De Usuario

Descargar
Página de 56
Multi-unit Operation
For assistance, please visit http://www.panasonic.com/help
39
To establish a conference call: 
Press {Conf}.
L
To leave the conference, press 
{
OFF}. The other parties can 
continue the conversation.
L
To put the outside call on hold, 
press {HOLD}. To resume the 
conference, press {Conf}.
1
During an outside call, press 
{
LOCATOR/INTERCOM} to put the 
call on hold.
2
To page a specific handset, enter its 
extension number ({1} – {4}).
To page all handsets, press {0} or 
wait for a few seconds.
3
Wait for the paged party to answer.
L
If the paged party does not answer, 
press {LOCATOR/INTERCOM} to 
return to the outside call.
4
To complete the transfer: 
Press {SP-PHONE}.
L
The outside call is being routed to 
the handset.
To establish a conference call: 
Press {CONF}.
L
To leave the conference, press 
{
SP-PHONE}. The other parties 
can continue the conversation.
L
To put the outside call on hold, 
press {HOLD}. To resume the 
conference, press {CONF}.
Answering transferred calls
Press {C} to answer the page.
Press {SP-PHONE} to answer the 
page.
Note for handset and base unit:
L
After the paging party disconnects, 
you can talk to the outside caller.
Registering a handset
The included handset and base unit are 
preregistered. If for some reason the 
handset is not registered to the base 
unit, register the handset.
1
Handset:
{
MENU} i {0}{0}{1}
2
Base unit:
Press and hold {LOCATOR/
INTERCOM
} until the IN USE 
indicator flashes.
L
After the IN USE indicator starts 
flashing, the rest of the procedure 
must be completed within 1 
minute.
3
Handset:
Press {OK}, then wait until a beep 
sounds.
4
{
OFF}
Registering an additional handset
See page 5 for information on the 
available model.
Start from step 2.
Deregistering a handset
1
{
MENU} i {0}{0}{2}
2
{
3}{3}{5} i {OK}
3
Select the handset you want to 
cancel by pressing the desired 
handset number ({1} – {4}).
Base unit
Handset
Base unit
TG607X.book  Page 39  Friday, December 22, 2006  2:47 PM