Panasonic NV-FJ730 Manual De Usuario
6
Preset Download
(To Set Up this VCR with a TV Already in
Use)
(To Set Up this VCR with a TV Already in
Use)
1) Switch the TV on.
2) Select the AV input on your TV.
(23) to [VCR].
4) Press the [VCR-ON/OFF]
(1) to
switch the VCR on.
Downloading of the setup data
starts automatically. (Applicable to
TVs with [Q Link] or [DATA
LOGIC] function)
Downloading of the setup data
starts automatically. (Applicable to
TVs with [Q Link] or [DATA
LOGIC] function)
If your TV is equipped with the
[Easy Link], [Megalogic] or
[SMARTLINK] function, the
Country setting menu appears on
the TV screen. Press the [Cursor]
(38)
[Easy Link], [Megalogic] or
[SMARTLINK] function, the
Country setting menu appears on
the TV screen. Press the [Cursor]
(38)
3421 to select the
desired country and the [OK]
The downloading automatically
starts.
starts.
• When the indication appears on
the VCR display, the
downloading is complete.
downloading is complete.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
(1) pressed on the VCR
main unit, not with the remote control.
If you are connecting your VCR to a TV using RF coaxial
cable and 21-pin Scart cable, then follow the steps.
(AV Connection)
RF Coaxial cable must be connected to watch TV channels
even if 21-pin Scart cable is used to connect VCR to TV.
cable and 21-pin Scart cable, then follow the steps.
(AV Connection)
RF Coaxial cable must be connected to watch TV channels
even if 21-pin Scart cable is used to connect VCR to TV.
Auto Setup Function
The Auto Setup function automatically tunes all available TV
stations and sets the VCR’s clock to the current date and
time.
stations and sets the VCR’s clock to the current date and
time.
1) Press the [VCR-ON/OFF]
turn on the VCR.
The Country setting menu
appears on the TV screen.
The Country setting menu
appears on the TV screen.
2) Press the [Cursor]
3421.
Select the country where you are
using the VCR.
using the VCR.
3) Press the [OK]
(24).
The VCR’s Auto Setup
automatically starts and tunes all
available TV stations and also
sets the clock. This takes about 5
minutes.
When the indication appears on
the VCR display, the Auto Setup
is complete.
automatically starts and tunes all
available TV stations and also
sets the clock. This takes about 5
minutes.
When the indication appears on
the VCR display, the Auto Setup
is complete.
4) Press the [MENU]
(7) for more
than 5 seconds.
The RF output channel number appears on the VCR
display.
The initial setting is channel 36.
The RF output channel number appears on the VCR
display.
The initial setting is channel 36.
5) Press the [Numeric]
(2) [0].
The displayed RF output channel number changes to
[
[
ss].
6) Press the [OK]
(24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT]
Press the [EXIT]
(27).
3421 to set the correct time
and date.
2) Press the [OK]
(24) to conclude the setting.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 17.
of the VCR again and restart the Auto Setup
See page 17.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
(1) pressed on the VCR
main unit, not with the remote control.
Download in
progress,
please wait.
progress,
please wait.
Position
67
Download
Panasonic VCR
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Panasonic VCR
1
2
3
4
5
6
7
8
9
:
1 AV1 21-pin Scart socket
2 Aerial Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 TV (not supplied)
2 Aerial Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 TV (not supplied)
7 Aerial Input socket
8 21-pin Scart socket
9 RF Coaxial cable (supplied)
10 Fully-wired 21-pin Scart cable
8 21-pin Scart socket
9 RF Coaxial cable (supplied)
10 Fully-wired 21-pin Scart cable
(not supplied)
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Panasonic VCR
Country
Tuning
Tuning
: others
: Ch 21
: Ch 21
Auto-Setup
Panasonic VCR