Panasonic NV-FJ730 Manual De Usuario
7
If you are connecting your VCR to a TV using only RF
coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
1) Press the [VCR-ON/OFF]
(1) to
turn on the VCR and tune your TV
until the Country setting menu
appears on the TV screen.
until the Country setting menu
appears on the TV screen.
2) Press the [Cursor]
3421.
Select the country where you are
using the VCR.
using the VCR.
3) Press the [OK]
The VCR’s Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
• When the indication appears on
available TV stations and also sets the clock. This takes
about 5 minutes.
• When the indication appears on
the VCR display, the Auto Setup
is complete.
is complete.
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR
to another number.
1) Press the [MENU]
is distorted, change the RF output channel on the VCR
to another number.
1) Press the [MENU]
(7) for more
than 5 seconds.
The RF output channel number
appears on the VCR display.
The initial setting is channel 36.
The RF output channel number
appears on the VCR display.
The initial setting is channel 36.
2) Press the [Numeric]
(2).
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 36, enter 39.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 36, enter 39.
Retune your TV to the VCR’s new RF output channel.
3) Press the [OK]
(24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT]
Press the [EXIT]
(27).
3421 to set the correct time
and date.
2) Press the [OK]
(24) to conclude the setting.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 17.
of the VCR again and restart the Auto Setup
See page 17.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF]
(1) pressed on the VCR
main unit, not with the remote control.
1
2
3
4
5
6
7
1 Aerial Input socket
2 Aerial Output socket
3 Aerial (not supplied)
4 Aerial lead (not supplied)
2 Aerial Output socket
3 Aerial (not supplied)
4 Aerial lead (not supplied)
5 TV (not supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Panasonic VCR