Panasonic vw-dtm21e Manual De Usuario
36
Useful Information
P & S
Let's see the possible solutions to the problems occurring when using MotionDV STUDIO. (Also read the
PDF manual)
PDF manual)
: The digital video device is not recognized by
the PC or it cannot be operated.
: Check that the digital video device is
powered.
: Check that the DV cable is firmly connected.
If the PC doesn't recognize the device,
disconnect the DV cable once.
disconnect the DV cable once.
: Check that nothing unusual has occurred in
the connected digital video device.
: Check that the connected digital video device
is manufactured by Panasonic.
: The PC might be unstable. Try rebooting the
PC.
: The images of the digital video device are not
displayed in the PC.
: Though activating the PC play control images
are displayed in the digital video device, it
takes a while before the images are
displayed on the PC screen.
takes a while before the images are
displayed on the PC screen.
: If 2 digital video devices are connected,
check that the playing device (input) and the
recording device (output) have been properly
selected.
recording device (output) have been properly
selected.
: Selecting [Stop displaying on PC monitor
while recording] in the recording settings,
images being recorded are not displayed on
the PC preview screen. To set the recording
settings select [Tool]
images being recorded are not displayed on
the PC preview screen. To set the recording
settings select [Tool]
→
→
→
→[Settings] from the
menu and click on the [Advanced settings]
tab.
tab.
: Check that the model of the digital video
device allows DV input.
: Images cannot be downloaded.
: To download about 4 minutes of images you
must have at least 1GB free on disk. Check
that there is enough free disk space.
Images might not be downloaded properly
when the time code is not recorded
uninterruptedly in tape images. Use a
recorded tape where the time code is
registered continuously.
that there is enough free disk space.
Images might not be downloaded properly
when the time code is not recorded
uninterruptedly in tape images. Use a
recorded tape where the time code is
registered continuously.
: The calibration stops midway.
: If the calibration stops while it was running,
repeat it. If it stops again, perform the
calibration manually. Correct the manual
setting entering a different number of frames
in the [Timing ajustment] setting field on the
calibration setting screen. The recording
start position and finish position can be
adjusted up to -50~+50 frames respectively.
(See the PDF manual)
calibration manually. Correct the manual
setting entering a different number of frames
in the [Timing ajustment] setting field on the
calibration setting screen. The recording
start position and finish position can be
adjusted up to -50~+50 frames respectively.
(See the PDF manual)
: If the model of the digital video device doesn't
allow the DV iutput, calibration cannot be
performed.
performed.
!