Gateway 7250R Manual De Usuario

          Troubleshooting

Power supply alarm buzzes 
and power supply status LED 
blinks indicating a failed power 
supply module

Replace the indicated power supply module. (You can 
turn off the audible alarm by inserting an appropriate 
tool into the port on the front panel and pressing the 
switch.)

Power supply alarm buzzes 
and both power supply status 
LEDs blink, indicating a failed 
common component

Replace the entire power supply housing. (One or both 
of the power supply modules may also be bad.)

An error occurs during an 
application or the server 
may be out of memory

Restart your server by pressing the reset button. If the 
system is still non-responsive, press and hold in the 
power button for 4 seconds to turn the system off. Turn 
the system back on, then follow the on-screen 
instructions.

Keyboard, mouse, and front 
panel are locked out when 
the password is set

Enter the password.

Keyboard is locked out 
when the password is set

Enter the password.

A key was depressed while 
the system was starting up

Clear the sticking key, then turn off the system, wait for 
a few seconds, then turn the system back on. 

The keyboard is not plugged 
in or connected properly

Make sure the cable is properly connected.

Something spilled into the 
keyboard

Turn off the system. Turn the keyboard upside down to 
drain it, then turn is right-side up to let it dry before using 
the keyboard again.

The keyboard is defective

Try a keyboard that you know is working.

8506162.book  Page 94  Wednesday, May 10, 2000  10:21 AM