Gateway 7250R Manual De Usuario
Memory
33
Memory
Four DIMM sockets on the system board support up to 2.0 Gigabytes (GB) of
PC/100 SDRAM.
PC/100 SDRAM.
Replacing memory
The DRAM DIMMs supported by the system board conform to the following
standards:
standards:
■
128 MB, 256 MB, and 512 MB ECC DIMMs
■
PC/100-compliant, unbuffered, ECC SDRAM
■
128 MB minimum system memory
■
2.0 GB maximum system memory
When you select and install DIMMs, keep the following in mind:
■
Registered DIMMs should not be combined with unbuffered DIMMs
■
Memory should be added in order, from DIMM 1 to DIMM 4.
■
There can be no empty slots between installed DIMMs.
■
No jumper settings are required for the memory size or type because the
BIOS automatically detects this information.
BIOS automatically detects this information.
To replace DIMMs:
1
Turn off the system and disconnect the power cord and all other external
peripheral devices.
peripheral devices.
2
Open the case. (See “Opening the case” on page 18 and “Preventing static
electricity discharge” on page 17.)
electricity discharge” on page 17.)
8506162.book Page 33 Wednesday, May 10, 2000 10:21 AM