Gateway 7250R Manual De Usuario
34
Replacing and Adding Internal Devices
3
Pull open the socket clamps on each side of the DIMM socket, then lift
the DIMM out of the socket. Store the DIMM in an anti-static container.
the DIMM out of the socket. Store the DIMM in an anti-static container.
4
Insert the new DIMM into the socket, aligning the two notches in the
DIMM with the two notches in the DIMM socket.
DIMM with the two notches in the DIMM socket.
5
Gently press the DIMM into the socket until it is firmly seated. Inserting
the DIMM automatically locks the socket clamps on each end of the
DIMM.
the DIMM automatically locks the socket clamps on each end of the
DIMM.
6
Close the case. (See “Closing the case” on page 20.)
7
Reconnect the peripherals and the power cord, then turn on the system.
8506162.book Page 34 Wednesday, May 10, 2000 10:21 AM