Toshiba dynadock pa3686u-1set Manual De Usuario

44

When the dynadock™ is disconnected from your computer or the 
computer's power is turned off, the front USB ports will charge 
certain connected USB devices if Charge mode is enabled. Charge 
mode is enabled by default.

Some USB devices may not support this feature.

To enable or disable Charge mode:

Click the TOSHIBA dynadock Utility icon in your Windows

®

 

System tray/Notification Area.

Click Settings.

Select the Set charge mode after undock checkbox to enable 
Charge mode, or de-select the checkbox to disable it.

Click OK.

For more information, see 

for more information.

A warning message displays on your computer screen if you 
disconnect your computer from the dynadock™ without first 
undocking it. To avoid data loss or equipment damage, it is 
important to undock to stop all communications with connected 
peripherals before you disconnect your computer from the 
dynadock™. TOSHIBA recommends that you do not turn off this 
warning message. 

A message will also display to notify you when undocking is 
complete and it is safe to disconnect your computer from the 
dynadock™.

To turn messages on or off:

Click the TOSHIBA dynadock Utility icon in your Windows

®

 

System tray/Notification Area.