Toshiba dynadock pa3686u-1set Manual De Usuario

67

The connection to the 
dynadock™ has been lost.

The computer may be out of wireless communication range. 
Bring the computer within close range of the dynadock™ to 
automatically reconnect.
The computer may be in standby/sleep/hibernation mode. The 
computer will re-connect when it resumes from standby/sleep/
hibernation.
In wireless mode, the USB adaptor may have been 
disconnected. Re-connect the USB adaptor to the computer.
In wired mode, the USB cable may have been disconnected. 
Re-connect the USB cable.
There may be an obstruction between the dynadock™ and your 
computer that is preventing wireless communication. Remove 
the obstruction.
Make sure the antenna switch on the back of the dynadock™ is 
in the correct position (up for communication via a USB cable; 
down for wireless communication).

Cannot access the local area 
network (LAN).

Check that the computer is properly configured to 
communicate with the network before connecting the LAN 
cable to the dynadock™. If necessary, contact your system 
administrator for assistance. 
Check that the network cable is properly connected to the 
dynadock™. For more information see 

Make sure the dynadock™ is connected to your computer 
(wirelessly or with a USB cable) and the computer is docked 
(indicator light on dynadock™ is green).
If the problem is related to the dynadock™ hardware, see the